Automatic Weighbridges, Unmanned Weighbridges, Unmanned Tolling Systems, Weighbridges with Camera, Automatic Weighbridge with Gates, Computerised Weighbridges, Automatic Truck Weighing, Tolling Systems
 * Aircraft Scale
 * Pit Mounted Weighbridge
 * Cart or Mini Weighbridges
 * Surface Mounted or Pitless weighbridges
 * Troubleshooting of Weighbridges
Home | About | Our Network | Products |Sales & Services |Contact | Enquiry

'PRECISION ELECTRONIC INSTRUMENTS CO'. manufacturing GOLDTECH brand weighing machines, Also manufacturers of Unamanned Weighbridges, Unmanned Tolling Systems, Weighbridges with Camera, Automatic Weighbridge with Gates, Automatic Weighbridges, Unmanned Weighbridges with Camera, Unmanned Weighbridges with Gates, Unmanned Truck Weighing, Unmanned Weighbridge System, Unmanned weighing of Trucks, computerised unmanned Weighbridge, Automatic Truck Weighing Scales...
 
   
 
How To Choose & Buy Truck Scales (WeighBridges / Weighbridge)
 
When considering which type of weighbridges to use for your own particular operation, it is important to take in to account the Following:
 
  • The amount of weighing expected.
  • The sitting and land available where the weighing will be done.
  • The type of vehicle to be weighed.
  • Whether it is of part length weighbridge (Cart / Mini Weighbridge) or gross weight weighbridge(Pit or Pit less type).
 
Full length Truck Weighbridge may be either portable or permanent installation. Portable Weigbridges include a lower frame work that is placed on a prepared surface and ramps are placed at either end for access. Portable Weighbridges are generally more expensive because of the lower frame work but are much easier to move from site to site and are ideal for contractors or road builders. These types of Weighbridges are not our scope of supply. We will consider only the Permanent Weighbridges. These permenent Weighbridges may be mounted either in Pit or above the ground low profile design,where the scale is mounted on a concrete slab with ramps at either end. Generally the Total Cost of a Pit type Weighbridge is greater because of the increased cost of excavation and pit construction .But this type of Weighbridges require less land, so where there is lesser space, we can go for such type of Weighbridges. Low profile Weighbridge's (Surface mounted or Pit less) design are less expensive yet require construction of access ramps at either end of the scale. This type of Weighbridge requires more land than others.Because the both side side Ramps of the Weighbridge require approximately same length as the length of Weighbridge. So in Public Weighbridge the most preferred choice is Pit Type Weigbridge. The Pitless or surface Mount Weighbridges are the first choice of big Industries where Land is not a big Problem as well as in Rainy area where water logging ia a major Problem.
 
Considering the above mentioned points, one can easily choose his better choice for Weighbridges. This type of Weighbridge gives the highest levels of accuracy for gross vehicle weights and may be tested and stamped for trade use. surface mounted ar Pit less weighbridges are usually from 7.5 mtr. upto 20 mtr long (Standard) and with capacities ranging from 30 ton to 100 tons as per the length of vehicle.The platform is above the Ground Level and Ramps are provided on the both sides . This design can be structured with 2 Nos of Joists as per platform sizes and capacities only in longitudinal direction and the others are in vertical directions to the main Joists. This is mainly know as Moduler section Design and may be in 1/2/3 modules. The Top plate will be with antiskid strips and Bolted with the modular Joists. In box type design, the box have to be placed in between the main Joists and bolted. The top Plate with antiskid strips, is welded with the box and each Box can be in compression load cell mounting or double endded shear beam Load cell mounting as per requirement. This type of weighbridge gives the highest levels of accuracy for gross vehicle weights and may be tested and stamped for trade use .Pit type weighbridges are usually from 7.5 mtr. upto 20 mtr long (standard) and the capacities ranging from 30 ton to 100 tons as per the length of Weighbridge. Thus this type of weighbridges can accommodate even the largest road vehicle.
 
This design can be structured with Joists as per platform sizes and capacities only in longitudinal direction and can be of 5 or maximum 6 nos.Joists. The Main Joists rest upon on the Transom and may be in 1/2/3 modules.The Top Plate will be with antiskid strips. The mounting arrangementof Load Cells can be in compreession Load cell mounting or double endded shear beam Load cell mounting as per requirement.
 
Cart or Mini Weighbridges are called Part Length Weighbridge. These are usually 3 or 4 metress long are most frequently found on farms where they are used to weigh agricultural tractor and trailer combinations. Besides these can also used in Bricks manufacturing unit. The Aircraft Platform Wheel Weigher Systems are ideal for weighing light Aircraft or Helicopter. The System provides Fast, accurate weight reading for varity of light to medium applications. The system is designed for easy transportation and quick setup. There may be 3 and 4 Platforms Wheel Weigher as per customer requirement. The system operates each and every individual weight of Unit, such as Unit1, Unit2 etc. and the Cumulative Toatl of the whole Unit.
 
 
Features of Weighbridge Indicator

Microcontroller base Digital Indicator with 1” bright red LED.
Having Auto Calibration & Auto Tare facility. In built Battery back-up facility.
RS 232C output to connect the Indicator with PC for Weighing data transfer enables effective Truck data management in combination with the Weighsoft Software.
 

features of Load Cells

Load cells of Compression & Double Ended Shear Beam type installed at better altitude avoids damage due to submersion into water even if the Pit is filled by overnight rain. Protection class IP-68/ IP-67, simple & compact design construction of the Load cell assures long life.
 

Optional
Standard Computer with Printer and UPS.
Weight Management software can be hooked to any PC as per customer's requirement. It is extremely user friendly. Detailed information can be obtained based on data, vehicle, supplier, material etc. Comprehensive reports can also be obtained of specific period giving details of the entire transactions during that period.

Platform Size : 3.0 x 7.5 Mtr. / 3.0 x 9.0 Mtr. / 3.0 x 12.0 Mtr. /
3.0 x 14.0 Mtr. / 3.0 x 16.0 Mtr./ 3.0 x 18.0 Mtr. / 3.0 x 20.0 Mtr.
Capacity: 30 T /40 T/ 60 T / 80 T / 100 T
Authorized sales & Service Centre:
North / South / East / West.

Contact Us
 
Corp. Office: - Precision Electronic Instruments Co.

Contact Person:
Surendra Singh

9871097483
17, Paschim Vihar Extn,
New Delhi-110063,
Tel : 91-11-25215147/49, 25212842
Fax: 25216312
E-Mail: sales@goldtechscales.com


Works: -


Unit –I
: Precision Electronic Instruments Co.
H-45, Udyog Nagar, Peera Garhi
Delhi 110041
Tel.: 91-11-45605555, 25962000/17/18/19
Fax: 25479967
E-Mail: sales@goldtechscales.com


Unit –II
: 77, Swarn Park, Mundka,
Delhi – 110041
Tel : 91-11-65479949,
 
Manufacturers, Exporters, Suppliers and Wholesalers of GOLDTECH
Unamanned Weighbridges, Unmanned Tolling Systems, Weighbridges with Camera, Automatic Weighbridge with Gates, Automatic Weighbridges, Unmanned Weighbridges with Camera, Unmanned Weighbridges with Gates, Unmanned Truck Weighing, Unmanned Weighbridge System, Unmanned weighing of Trucks, computerised unmanned Weighbridge, Automatic Truck Weighing Scales
 
 
 
 
 
 
View Our Partner Websites - www.a2zscales.com